CVE-2026-10674 Details
Description
The NXP LPUART serial driver (drivers/serial/uart_mcux_lpuart.c), when CONFIG_UART_USE_RUNTIME_CONFIGURE is enabled, called LPUART_Deinit() at the start of mcux_lpuart_configure(), which disables the LPUART peripheral clocks. The requested configuration is validated only afterwards (in mcux_lpuart_configure_basic), and unsupported parity/data-bit/stop-bit/flow-control values return -ENOTSUP before the clock is re-enabled. As a result, a uart_configure() request with an unsupported configuration left the LPUART in a clock-disabled state; any subsequent access to LPUART registers (poll_out/poll_in, interrupt handling, or a later reconfigure) faults on the gated peripheral and escalates to a hard fault, crashing the system. uart_configure() is a Zephyr syscall whose verifier (z_vrfy_uart_configure) only checks that cfg is readable user memory and forwards the caller-supplied configuration unchanged, so an unprivileged userspace thread with access to an LPUART device can deterministically trigger the fault, a persistent system-wide denial of service. Introduced in v2.5.0 and present in all subsequent releases until this fix, which removes the LPUART_Deinit() call and instead only disables the transmitter/receiver, leaving the clock running.
A denial-of-service vulnerability has been identified in the NXP LPUART serial driver, specifically in versions 2.5.0 through 4.4.1, when the runtime configuration option is enabled. The issue arises because the driver disables the LPUART peripheral clocks before validating the requested configuration. This flaw allows an unprivileged userspace thread to send a configuration request with unsupported parameters, leaving the LPUART in a state with disabled clocks. Subsequent attempts to access LPUART registers or handle interrupts result in a hard fault, crashing the system. This vulnerability was introduced in version 2.5.0 and exists in all releases up to 4.4.1, except for version 4.5.0, where the issue has been fixed.
Users can upgrade to Zephyr version 4.5.0 or later, where this vulnerability has been fixed.
Metrics
CVSS 4.0 Severity and Vector Strings:
No CVSS 4.0 data is available for this CVE.
CVSS 3.x Severity and Vector Strings:
No data available for CVSS Version 2.0 on this CVE.
CISA-ADP
Assessed Jul 22, 2026References to Advisories, Solutions, and Tools
By selecting these links, you will be leaving this site. These are references gathered from the official CVE record and are not endorsed by Volerion.
Weakness Enumeration
| CWE-ID | CWE Name | Source |
|---|---|---|
| CWE-617 | Reachable Assertion | [email protected] |
Affected Products
| Product | Versions |
|---|---|
| zephyrproject zephyr | >= 2.5.0, <= 4.4.1 |
CPE
Remediation
| |
Change History
5 change records found show changes
| Date | Action | Recorded By |
|---|---|---|
| Oct 24, 2026 | CVE Translated | [email protected] |
| Oct 15, 2026 | CVE Modified | [email protected] |
| Jul 30, 2026 | Initial Analysis | [email protected] |
| Jul 22, 2026 | CVE Modified | CISA-ADP |
| Jul 21, 2026 | New CVE Received | [email protected] |