CVE-2025-68236 Details
Description
In the Linux kernel, the following vulnerability has been resolved: scsi: ufs: ufs-qcom: Fix UFS OCP issue during UFS power down (PC=3) According to UFS specifications, the power-off sequence for a UFS device includes: - Sending an SSU command with Power_Condition=3 and await a response. - Asserting RST_N low. - Turning off REF_CLK. - Turning off VCC. - Turning off VCCQ/VCCQ2. As part of ufs shutdown, after the SSU command completion, asserting hardware reset (HWRST) triggers the device firmware to wake up and execute its reset routine. This routine initializes hardware blocks and takes a few milliseconds to complete. During this time, the ICCQ draws a large current. This large ICCQ current may cause issues for the regulator which is supplying power to UFS, because the turn off request from UFS driver to the regulator framework will be immediately followed by low power mode(LPM) request by regulator framework. This is done by framework because UFS which is the only client is requesting for disable. So if the rail is still in the process of shutting down while ICCQ exceeds LPM current thresholds, and LPM mode is activated in hardware during this state, it may trigger an overcurrent protection (OCP) fault in the regulator. To prevent this, a 10ms delay is added after asserting HWRST. This allows the reset operation to complete while power rails remain active and in high-power mode. Currently there is no way for Host to query whether the reset is completed or not and hence this the delay is based on experiments with Qualcomm UFS controllers across multiple UFS vendors.
A vulnerability in the Linux kernel's UFS (Universal Flash Storage) power management sequence can lead to an overcurrent protection fault in the regulator supplying power to UFS devices. This issue arises during the power-off sequence when the UFS driver requests to disable the power rail. If the regulator is still shutting down while the UFS device's ICCQ (Interconnect Command Queue) current exceeds the low-power mode thresholds, it can trigger an overcurrent protection fault. The vulnerability affects the UFS driver for Qualcomm controllers in the Linux kernel stable tree.
A 10ms delay has been introduced after asserting the hardware reset during the UFS power down sequence. This delay allows the reset operation to complete before turning off the power rails, preventing the overcurrent issue. Users should ensure they are using a version of the Linux kernel that includes this fix.
Metrics
CVSS 4.0 Severity and Vector Strings:
CVSS 3.x Severity and Vector Strings:
No data available for CVSS Version 2.0 on this CVE.
Volerion
Assessed Dec 16, 2025References to Advisories, Solutions, and Tools
By selecting these links, you will be leaving this site. These are references gathered from the official CVE record and are not endorsed by Volerion.
| URL | Source(s) | Tag(s) |
|---|---|---|
| https://git.kernel.org/stable/c/0c2619d1da8bd3d18524d69f12571a8cd7362833 | kernel.org | |
| https://git.kernel.org/stable/c/1c963811b0824d0f51aabd394986589a2126f341 | kernel.org | |
| https://git.kernel.org/stable/c/5127be409c6c3815c4a7d8f6d88043e44f9b9543 | kernel.org | Source CodeVendor |
| https://git.kernel.org/stable/c/b712f234a74c1f5ce70b5d7aec3fc2499c258141 | kernel.org | Source CodeVendor |
| https://git.kernel.org/stable/c/dd52d72f2bd727ca60c1bc9820a307b70e2154ec | kernel.org |
Weakness Enumeration
No weakness enumeration is available for this CVE.
Affected Products
| Product | Versions |
|---|---|
| Linux kernel | All versions |
CPE
Remediation
| |
| Qualcomm UFS | All versions |
CPE
Remediation
| |
Change History
5 change records found show changes
| Date | Action | Recorded By |
|---|---|---|
| Oct 30, 2026 | CVE Modified | kernel.org |
| Oct 21, 2026 | CVE Modified | kernel.org |
| Oct 14, 2026 | CVE Translated | [email protected] |
| Jun 17, 2026 | CVE Modified | kernel.org |
| Dec 16, 2025 | New CVE Received | kernel.org |
Volerion